![background image](http://html1.mh-extra.com/html/stulz-tecnivel/climapac/climapac_installation-operation-and-maintenance-manual_1387362005.webp)
© STULZ Tecnivel – all rights reserved
EN/11.2020 Technical data subject to modifications
5
2. Transport/Storage
2.1
Delivery of units
The ClimaPac unit is delivered packed with heat shrinkable plastic film in separated modules as
indicated in the unit drawing. Modules must be assembled together following the instructions of the
part 5. Assembly and installation. In case the unit is delivered completely assembled (to be consulted
with STULZ), the assembly is not required.
If you use a cutting tool (e.g. cutter) to remove the package, take care not to damage
the unit (scratching).
When delivery is accepted, check the unit against the consignment papers for
completeness and for external damage and record it on the consignment note in the
presence of the freight forwarder.
•
You receive the consignment papers with the delivery of the A/C unit.
•
The shipment is made ex works, in case of shipment damages, please assert your
claim towards the carrier.
2.2
Transport
Mortal danger by crushing.
A defective lifting device can lead to the uncontroler fall of the A/C unit.
Do not stay under suspended loads!
Service doors must always be closed during transport.
The ClimaPac unit can be moved by lifting devices with belts or ropes.
In order to ensure a safe craning of the units, instructions here below must be followed:
• Mount approriate shackles on the lifting lugs on the base frame.
• Use crossbeams with the appropriate width to prevent the sling to rub against the unit.
• With weatherproof units, make sure the protruding parts of the roof are not damaged by the lifting
gear.
• Do not lift any other loads together with the module/unit which is to be transported.
All the local standards and regulations about crane transport must be observed.