![background image](http://html1.mh-extra.com/html/stulz-tecnivel/climapac/climapac_installation-operation-and-maintenance-manual_1387362004.webp)
4
© STULZ Tecnivel – all rights reserved
EN/11.2020 Technical data subject to modifications
Air Handlers Units
ClimaPac Series
Proper use also includes observance of the operation manual and instructions from the manufac-
turer of the individual components, as well as the inspection and maintenance intervals stipulated by
STULZ Tecnivel.
Any use other than that described above is considered improper. If necessary, check if your units are
suitable for your intended purpose and application. The manufacturer/supplier is not liable for any
damages arising from improper use. The user alone bears the risk.
Misuse particularly includes:
• Conveying any other gases except air.
• Conveying steam or water.
• Coarse filtering and/or filtering any other media except air.
• Chopping up or reducing size of materials.
• Drying out clothing.
• The unit is not suitable for handling abrasive media.
Unless clearly specified by Stulz, the ClimaPac units shall not be used in following cases:
• in explosion-risk areas.
• in rooms with conductive dust.
• in rooms with strong electromagnetic fields.
• in rooms with aggressive atmosphere that may attack plastics or cause corrosion (especially in
atmosphere where zinc is particularly susceptible to corrosion).
ClimaPac units must not be installed in a place accessible to general public.
In case of doubt, please contact Stulz
1.3
Safety Instructions
These operating instructions contain basic information which is to be complied with for installation,
operation and maintenance. They must therefore be read and complied with by the fitter and the
responsible trained staff/operators before assembly and commissioning. They must be permanently
available at the place where the system is used.
• Works have to be carried out by competent staff only.
• Safety devices may not be bypassed.
1.4
Duties of the operator
The operator must ensure that all maintenance, inspection and assembly work is carried out
by authorized and qualified specialist staff who have made an in-depth study of the operating
instructions.
Independent conversion and manufacture of replacement parts.
The system may only be converted or modified after consultation with STULZ. Original replacement
parts and replacement parts/accessories authorized by STULZ are an aid to safety.