Stulz Tecnivel ClimaPac Installation, Operation And Maintenance Manual Download Page 3

Page: 3 / 32

1. Safety

1.1

Marking

1.1.1

Safety signs

threatening danger, grievous bodily harm and death.

dangerous situation, grievous bodily injury.

CAUTION

dangerous situation, light bodily injury.

important information and application notice.

ESD NOTE

risk of damaging electronical components.

1.1.2

Components signs

Following signs identify the different components of the unit.

They are used in this manual and on the proper unit in order every section can be quickly identified.

Fan

Empty section

Plate heat
exchanger

Cooling coil

Damper

Run-around
coil

Heating coil

Filter

Rotary heat
exchanger

Cooling/ heating
coil

Silencer

Custom section

Humidifier

Controller

1.2

Intended use

ClimaPac air handling unit must only be used for ventilation and air conditioning of building.

It includes:
•  filtering normally polluted air.
•  air cooling.
•  air heating.
•  air humidifying and/or dehumidifying.

Summary of Contents for ClimaPac
































Search results

Summary of Contents for ClimaPac

Reviews:

Related manuals for ClimaPac

Brands by name

Popular brands

Stulz Tecnivel ClimaPac, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for ClimaPac

Reviews:

Related manuals for ClimaPac

Brands by name

Popular brands