7
④
Delay
Press
to enable the delay, default is disabled. Adjust the delay time using the main
encoder on the control panel or by the soft-encoder on the touch screen (fine tuning can be
activated by pressing and holding down the main encoder). The delay can be adjusted from
0 ms to 200 ms, default is 0ms.
⑤
HPF
Press
to enable the High-Pass Filter to remove rumble or microphone pops, default is
disabled. Adjust the HPF frequency using the main encoder on the control panel or by the
soft-encoder on the touch screen (fine tuning can be activated by pressing the main
encoder). The frequency range is 16 Hz to 400 Hz, with 16 Hz being default.
⑥
Insert
Press an effect module button to insert it prior to the channels EQ. Each effect module can
only be inserted in one place and the input channels allow for only one effect module to be
inserted. When a selected module is used in another channel or bus, a pop-up window will
warn: “The module can only be used once and it is already used by xxx. Are you sure you
want to use the module forcibly now? Yes / No”. Change the effect settings through:
SETUP
→
FX
→
click on a module to open a dialog for the effect.
Parametric EQ Subpage
The EQ features a 4-band full parametric EQ that can easily be set up on screen via touch.
1
2
3
4
5
6
7
