9
Bidet seat installation
（1）connect and tight the three
braided hoses to Bidet seat by
wrench, then insert the hose and
install the clamp.
(2) Align the location hole of Bidet
seat with toilet bowl guide pillar, press
into the Bidet seat.
(3) Place the gasket on both sides of
the Bidet seat, lock the screw and
insert the rubber pads. Then turn on
the water supply and plug in.
9.Cleaning and maintenance
Cleaning the Cover & Seat:
Turn off the water supply.
Use a soft and wet cloth to clean the
product (Wring out a cloth)
Notices:
Do not use dry cloth or toilet paper
to clean the product or the
appearance of product will be
scratched.
Avoid putting water into the inside of
back cover, otherwise some
electronic components in the back
cover might be damaged.
Cleaning the toilet bowl:
Notices:
Clean the toilet bowl with
cleaner and flush the cleaner
within 3 minutes.
