5
1) Disconnect power before lamp’s replacement or servicing (service personnel)
2) Do not open the lamp cover (G) for 600 seconds after switching off
3) Wear gloves and goggles to re-lamping or to work inside the unit (service personnel).
4) Loosen the two screws (B), unscrews completely the two screws (A) and open the lamp cover (G), pict.3
5) Unscrews the two screws (C) on the lamp support plate, pict.4
6) Remove the lamp holder (D) and insert the lamp into the lampholder, pict.5
Do not touch the quarz bulb with fingers. If this happenes, clean the bulb before use with dry cloth and alcohol.
7) Replace, with care, the lampholder (D) and screws the two screws (C).
In case of replacement of the lamp or maintenance, do not open the fixture unless 10 minutes have passed from
the switching off.
This operation has to be done when the fixture is disconnected from the mains supply
WARNING
!
C
pict.3
A
G
B
C
pict.4
pict.5
D
LAMP'S INSTALLATION/REPLACEMENT
