Lumination® LIB
Lumination
®
Linear
In-Bay Lighting
(LIB)
Installation Guide
A-1026549
Save These Instructions
Prepare Electrical Wiring
Materials Supplied With Luminaire
Use only in the manner intended by the
manufacturer. If you have any questions,
contact the manufacturer.
The LED fixture must be supplied with 120VAC,
50/60 Hz and connected to an individual properly
grounded branch circuit, protected by a circuit
breaker. Use min. 75 C supply conductor.
The grounding and bonding of the overall system
shall be done in accordance with the National
Electric Code (NEC) Article 600 and local codes
Electrical Requirements
Electrical Requirements
LIB Series Luminaire
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
WARNING / ADVERTISSEMENT
CAUTION / ATTENTION
RISK OF FIRE OR ELECTRIC SHOCK
•
Turn power off before inspection, installation or removal.
•
Installation requires a person familiar with the construction and operation of
the luminaire’s electrical system and the hazard involved. If not qualified, do
not attempt installation. Contact a qualified electrician.
•
To prevent wiring damage or abrasion, do not expose wiring to edges of
sheet metal or other sharp objects.
•
Follow all NEC and local codes.
•
Fixture may fall down if not installed properly, follow installation instructions
•
Wear safety glasses and proper aid during installation and maintenance
•
Le luminaire peut tomber s’il nest pas installe correctement, suivre les
instructions d’installation.
•
Porter des lunettes de securite et les aides appropriees lors de !’installation
et de l’entretien.
•
Coupez l’alimentation avant d’inspecter, installer ou deplacer le luminaire.
•
Risque d’incendie ou d’electrocution. N’ installer cette trousse que sur des
luminaires qui ont les caracteristiques de construction et les dimensions
telles que montrees sur les photographies et dessins presentes.
•
Pour prevenir les dommages ou !’abrasion de fils electriques, ne pas
exposer les fils aux aretes de piece de t61erie ou n’importe quels autres
objets tranchant
•
Respectez tous les codes NEC et codes locaux
RISQUES D’INCENDIE OU DE DECHARGES ELECTRIQUES
STOP
Mounting Hardware
Multiple-Length Power Supply Cords