Lumination® LIB
Installation Guide
Single Fixture Installation
Provided Components
Optional Accessories
1
A
C
B
D
E
Attach the mounting clips to the desired surface
in a straight line using the provided screws. The
distance between the two clips is determined
by the length of the fixture, as noted in the
chart below.
Install the protective cap on
the female connector of the
fixture.
fig. 1A
Fixture Length
2ft
3ft
4ft
Mounting Width
12-16in
~300-400mm
16-24in
~400-600mm
24-36in
~600-900mm
Mounting
Bracket
Magnetic
Mounting
U-Shape
Channel
Power Linking Cords
(4” & /1/2/6/10/12ft)
Center the length of the fixture within the
installed mounting clips. Press and snap the
fixture into the mounting clips, with the male
power connector facing the power supply drop.
Plug the power cord into a
120VAC supplied outlet.
(The maximum distance to
the receptacle is determined
by the length of cord
provided.)
Power Cords
(1/2
/
6/10/12ft)
Protective
Cap
Fastener
Remove the protective film on
the diffuser.
Connect the power
cord to the male connector.
peeling off the film
Not
e:
When using magnetic mounting clips, two installed
clips need to support at least 4 times the weight of the fixture
(0.5Kg per fixture).