Studer Vista 5 M3, Operating Instructions Manual

Page: 125 / 564

Vista 5 M3 Digital Mixing System
Parameters 3-37
Document generated: 28.08.13 SW V4.9
3.4.3.1 Amplitude Panning
Mono Channels: Stereo Channels:
LR Panning Parameters for Mono Channels:
Mono channel LR PAN has only one panning function: left/right panning.
It is useful for left/right panning to stereo master or group buses, or for odd/
even panning to group or multi-track buses.
General PAN
On/Off is selected with the
PAN
hardware key in the
CHANNEL PROCESSING
section.
PAN Rotary The rotary encoder provides left/right (odd/even) panning control in 1° steps
from –30° (fully left) to +30° (fully right).
LR/Direction Panning Parameters for Stereo Channels:
Stereo channel DIR/BAL PAN is a stereo direction panning function. It is
useful for controlling the direction of stereo signals to master, group, and
multi-track buses.
DIR WIDTH is identical to the DIR pan with an optional width control added
(depending on the current session configuration).
PAN
On/Off is selected with the
PAN
hardware key in the
CHANNEL PROCESSING
section.
INP DIR / BAL On/Off Activates the input balance or the input direction control, depending on the
function selected with INP BAL / INP DIR. This function is placed within
the signal path of the channel before the mono switch, selectable in the ‘2CH
mode’ section.