Studer RCC-02, User Manual

Page: 41 / 104

Studer Innotec SA
RCC-02/-03
User manual
V4.4.0
37
14.5 A
CCESS TO THE PARAMETERS
You can access to the parameters by two different ways:
 By its reference number;
 Via the thematic menu.
14.5.1 Access to a parameter by its number
Each Xtender parameter is directly accessible by its unique reference number. This function can be
used in order to change the value of a parameter or to consult its set value.
If you know the reference number of a parameter that you want to change, you can access to it
directly with this menu. Move with the keys UP and DOWN to highlight the parameter then select it
by the key SET. You have then the possibility to change the value of this parameter.
For each parameter, its set value is written opposite to it. If a parameter does not have a value
displayed, this means that you do not have the user level required to change the value or that the
parameter does not have a value (a menu title for instance).
When you want to access to a parameter which access level is superior to yours, it is possible to do it
only with a code: select the parameter that you want to change with the keys UP and DOWN then
press the key SET. The remote control then displays a 4 digits number. By communicating this number
to your installer, you can receive an activation number which will allow to modify the wanted
parameter.
The key received is valid only for one single access to the wanted parameter. This is why it can be
necessary to be online with your installer when it comes to do several changes.
14.5.2 Access to a parameter via the menu
The Xtender configurations are divided into several categories:
 Basic configurations
 Battery and its charge cycle configurations
 Inverter configurations
 The parameters of charger and input signals
 First auxiliary contact configurations
 Second auxiliary contact configurations
 Auxiliary contact extended function configurations
 The parameters of the system
 Three-phase or parallel operation configurations
 The parameters of grid feeding
According to the user level selected, it is possible to access
several hundred configurations. For this reason, each
configuration has a unique ID displayed top right. In the
event of questions on the subject of a configuration, ensure
that you have this number at hand.
When you modify a configuration, a star is displayed to
the left of the value if it corresponds to the factory-set
value.
The various configurations can be adjusted within a large range. Nevertheless, some configurations
are interdependent and cannot be adjusted beyond the value of other configurations. You can
consult the list of dependencies on the list in appendix 1.