Studer OnAir 3000, Operating Instructions Manual

Page: 153 / 372

OnAir 3000 Digital Mixing Console
Operation 5-101
Date printed: 31.10.08 SW V3.0
5.10.8 Internal Access Handling
The extensions providing the interface to the user are responsible for checking
the corresponding privileges.
5.10.8.1 User GUI
The user GUI extension checks the privileges on two different levels, i.e.
for pages and for console parameters. For a user having no access right to a
certain page, this page will not open. Access to a console parameter depends
of the current privilege flag setting:
Grant
The corresponding button or the black parameter value field above the rotary
encoder is visible and allows controlling this parameter.
Deny
The corresponding button or the black parameter value field above the rotary
encoder is not visible, there is no way for controlling this parameter.
Special Cases:
Parameters without Privileges
There exist console parameters without privileges, such as fader level, channel
on/off, PFL). These parameters can be controlled from the user GUI whenever
access to the corresponding page is granted.
Access
The
Access
button on the
CHAN
-
Input
page allowing the user to request
access to the microphone input card’s unique resources is visible only if ac-
cess to at least one of these parameters is granted.
Insert ON/OFF
The privilege for the
Insert ON/OFF
buttons on the
CHAN
-
FDR/Bus
and
the
Sum
-
Master
pages is defined in the
ROUT::Insert
section. Therefore
the
Insert ON/OFF
button for a certain logical input or master is visible only
if the user has access to the insert currently assigned to that logical input or
master.
Input Routing
The input routing (strip assignment) can be controlled from both the
CHAN
-
Input
and the
Routing
-
Input
pages. The
ROUT::Input
-
All Parameters
privilege provides access to the strip assignent on
both
pages.
As a consequence, the
CHAN
-
Input
page and the
Input Selection
button
on this page can be accessed under the following conditions:
•
For logical inputs:
• The
CHAN
-
Input
page is accessible if either the ROUT::Input - All
Parameters
privilege or at least one of the
CHAN::Input
privileges
are granted.
• The
Input Selection
button on the
CHAN
-
Input
page is visible if
the ROUT::Input - All Parameters privilege is granted.
•
For all sum buses:
• The
CHAN
-
Input
page is accessible if the
ROUT::Input
-
All Par-
ameters privilege is granted.
Any
SUM::...
privileges are ignored.
• The
Input Selection
button on the
CHAN
-
Input
page is always
visible.