manualshive.com logo in svg

Studer OnAir 3000, Operating Instructions Manual

The Studer OnAir 3000 is a professional-grade broadcasting console designed to enhance audio production. Discover its full potential by downloading the Operating Instructions Manual, a comprehensive guide for mastering the device. Access the manual for free at manualshive.com, where you can conveniently download it to optimize your broadcasting experience.

Share
Download
background image

OnAir 3000 Digital Mixing Console

5-94  Operation

Date printed: 31.10.08

SW V3.0

5.10      User Access and Management

5.10.1      Purpose

                                                           OnAir 3000 consoles are used in different studios with different working 

practice and different personnel structures. A large part of users in broadcast 
studios is not technically oriented. They request from a mixing console that 
it is simple to use, reliable, and free of “unnecessary” controls and displays. 
Setting of a wider range of console parameters, saving of console settings 
(snapshots) and modifications of the console configuration have to be left 
for technically more competent users (e.g. studio technicians, chief engineer, 
etc.). It may also be necessary to protect parts of system data, and to give the 
permission to change them only to a restricted number of users. In order to 
satisfy these needs, the OnAir 3000 console supports individual user acces 
rights. By assigning appropriate access rights to each user it is possible to 
individually adapt the OnAir 3000 console to very different environments.

                                                           The  access  rights  for  a  specific  user  are  defined  on  two  different  levels; 

“privileges” are defined for access to GUI pages and to groups of console 
parameters. Individual access to single console parameters will be available 
in a later software version. 

                                                           A set of privileges forms a “policy”. One or more policies can be assigned to 

every user, which means that the access rights for a certain user are the result 
of a logical OR combination of all policies assigned to him. If no policy is 
assigned to a particular user, he has no access to any of the console settings.

5.10.2      General

                                                           Once a user is logged in via the user GUI, his login information is saved in 

the user GUI memory (“container”). In addition, after a successful log-in of 
a user, a corresponding entry is made in the log file. The container saves the 
access rights for the user currently logged in. After start-up of the console, 
the default user is logged in per default.  

                                                           This concept allows different users being logged in to the system at the same 

time, as illustrated below. The example we are looking at consists of four 
subsystems:

CORE

ID: 

10

Current User ID: 

Default

REMOTE CONFIG GUI

ID: 

20

Current User ID: 

Admin

DESK B

ID: 

150

Current User ID: 

DJ

DESK A

ID: 

100

Current User ID: 

Operator

Summary of Contents for OnAir 3000





















































































































































































































































































































































































Reviews:

No comments

Related manuals for OnAir 3000

Valeton GP-100 Firmware Update Manual preview
GP-100
Brand: Valeton Pages: 2
Mackie Onyx 4 Bus Owner'S Manual preview
Onyx 4 Bus
Brand: Mackie Pages: 36
OSTBA FM101 User Manual preview
FM101
Brand: OSTBA Pages: 9
Studio Technologies 214A User Manual preview
214A
Brand: Studio Technologies Pages: 27
Fender PX-2208 Owner'S Manual preview
PX-2208
Brand: Fender Pages: 90
AKG DMM 12BC User Instructions preview
DMM 12BC
Brand: AKG Pages: 79
Optimum BON APPETIT BONMIX User Manual preview
BON APPETIT BONMIX
Brand: Optimum Pages: 23
EBS OctaBass Blue Label Edition User Manual preview
OctaBass Blue Label Edition
Brand: EBS Pages: 8
MORLEY CWAES Manual preview
CWAES
Brand: MORLEY Pages: 1
Electrolux Dito 603256 Brochure & Specs preview
Dito 603256
Brand: Electrolux Pages: 4
Electrolux Dito 603289 Brochure & Specs preview
Dito 603289
Brand: Electrolux Pages: 4
Electrolux Dito 603529 Brochure & Specs preview
Dito 603529
Brand: Electrolux Pages: 4
Electrolux DITO B3000 450 W Brochure & Specs preview
DITO B3000 450 W
Brand: Electrolux Pages: 4
Sound Devices 552 User Manual And Technical Information preview
552
Brand: Sound Devices Pages: 60
Acnodes MKD6 CM Series User Manual preview
MKD6 CM Series
Brand: Acnodes Pages: 20
Mad Bean Pedals HoneyDripper Manual preview
HoneyDripper
Brand: Mad Bean Pedals Pages: 9
Mad Bean Pedals VFE Switching Board V.2 Quick Start Manual preview
VFE Switching Board V.2
Brand: Mad Bean Pedals Pages: 18
Breville Bakery Boss BEM823 Instruction Book preview
Bakery Boss BEM823
Brand: Breville Pages: 20

Brands by name

Popular brands

Load more brands