Studer Innotec SA
BSP
User manual
V1.3
7
1.3
W
ARRANTY AND LIABILITY
During production and assembling, each BSP gets several controls and tests. They are carried out
in full respect of fixed procedures. Each BSP is given a serial number allowing a perfect follow-up
of the controls, in conformity with the specific data of every device. For this reason, it is very
important to never remove the descriptive sticker bearing the serial number. The production, the
assembling and the tests of each BSP are entirely carried out in our factory in Sion (CH). The
warranty of this product depends on strictly following the instructions in this manual. The warranty
period for the BSP is 5 years.
1.3.1
Disclaimer of warranty
No warranty will be applied for damages caused by handling, operation or actions that are not
described in this manual. Damages arisen from the following events are not covered by the
warranty:
Overvoltage on the device (Applying a voltage higher than 85 Vdc).
Reverse polarity while connecting the battery.
Liquid in the device or oxidation due to condensation.
Failures due to a fall or to a mechanical shock.
Modifications made without the explicit authorization of Studer Innotec SA.
Nuts or screws partially or insufficiently tight during installation or maintenance.
Damages due to atmospheric overvoltage (lightning).
Damages due to transport or improper packaging.
Disappearing of original marking items.
1.3.2
Disclaimer of liability
Installation, commissioning, use and maintenance of this device cannot be supervised by the
company Studer Innotec SA. For this reason, we do not accept any liability for damages, costs or
losses generated either by an installation that is not conforming to the prescriptions, by a defective
operation or by poor maintenance. The use of this device is under the responsibility of the end-
user. This device is neither designed nor guaranteed for the supply of life support applications or
any other critical application with potential risks for human beings of for the environment. We shall
assume no liability for patent infringement or other third party rights involved in the use of this
device.
1.4
S
AFETY PRECAUTIONS
1.4.1
Generalities
Do read carefully all safety instructions before proceeding to the installation and commissioning
of the device. Not respecting these instructions might constitute a lethal physical danger but can
also damage the functionalities of the device. Therefore, do keep this manual close to the device.
Strictly follow the local and national norms and regulations in force. This is valid for all
installations.
