Stryker Zoom 2040 Maintenance Manual Download Page 29

Page: 29 / 221

www.stryker.com

2040-309-002 REV B

Problem / Failure

Possible Cause

Recommended Action

The ZOOM

drive does work

- the bed will drive - but all
other bed functions are not
working.

No AC power from the
ZOOM

base.

A. Check AC voltage coming out of the

inverter.  It  should  be  120 VAC  between
pin  1  and  pin  4  on  header  5  on  the
AC crossover  board  (Refer  to  Display/
CPU section).

B. Check all cable connections from the

batteries to the converter.

C. Check the AC crossover board.

The bed power cord is
plugged in but the battery
does not charge.

The battery charger is not
functioning.

A. Check the circuit breakers on the ZOOM

litter (Refer to NA 0000-059-179 Item)
Circuit Breaker 2.

B. Check the battery charger.
C. Check all cable connections on the

charger.

Troubleshooting Guide

Return To Table of Contents

Summary of Contents for Zoom 2040






























































































































































































































Search results

Summary of Contents for Zoom 2040

Reviews:

Related manuals for Zoom 2040

Brands by name

Popular brands

Stryker Zoom 2040, Maintenance Manual

Search results

Summary of Contents for Zoom 2040

Reviews:

Related manuals for Zoom 2040

Brands by name

Popular brands