Stryker Triathlon Surgical Manualline Download Page 12

Page: 12 / 48

Figure 8

Figure 9

Figure 10

Femoral Preparation

Femoral Intramedullary Alignment

The Universal Driver allows for attachment of

all drills and pins . The Universal Driver may be

attached directly to a reamer, drill, or a Jacob’s

Chuck .

Locate the IM drill hole; it is approximately 1cm

anterior to the femoral attachment of the posterior

cruciate ligament and slightly medial to the midline

of the distal femur .

Identification of landmarks may be aided by

removal of osteophytes from the margins of the

intercondylar notch .

Attach the

” IM Drill to the Universal Driver and

drill into the IM canal ensuring that the drill is

parallel to the shaft of the femur . The first diameter

will create a tight fit around the IM Rod . If further

clearance is desired, continue to drill until the larger

step diameter opens the hole . This will allow the IM

canal to dictate the position of the rod avoiding the

need to “toggle” the drill to create clearance .

Attach the T-Handle Driver to the

” IM Rod .

Insert the IM Rod into the MIS Femoral Alignment

Guide . The MIS Femoral Alignment Guide is

designed for use on either the left or right knee and

may be set between 2° and 9° of valgus (Note: this is

typically set between 5° and 7°) . Set the instrument

to the desired angle by pulling back on the black

knob of the MIS Femoral Alignment Guide and

placing it in the appropriate notch . Advance the

rod, with attached guide, slowly up the IM canal

until the desired depth is reached ensuring that the

alignment guide is flush against the most prominent

condyle .

Snap the MIS Distal Resection Guide onto the MIS

Adjustment Block and insert the posts of the MIS

Adjustment Block into the two holes in the MIS

Femoral Alignment Guide .

Place the MIS Femoral Alignment Guide in contact

with the more prominent distal femoral condyle and

align the guide in neutral I/E rotation . The guide

face is angled at 3° and has a tick mark to reference

Whiteside’s Line to set I/E rotation, if desired .

Insert

” headless pins into the converging pinholes

on the MIS Femoral Alignment Guide to aid in

stabilization .

Femoral

Preparation

Triathlon

Knee System

Single-Use Instruments Surgical Protocol

Summary of Contents for Triathlon

















































Search results

Summary of Contents for Triathlon

Reviews:

Related manuals for Triathlon

Brands by name

Popular brands

Stryker Triathlon, Surgical Manualline

Search results

Summary of Contents for Triathlon

Reviews:

Related manuals for Triathlon

Brands by name

Popular brands