Stryker S3 MEDSURG BED Operation Manual Download Page 51

Page: 51 / 79

www.stryker.com

3006-209-001 REV B

Operation

Footboard control panel - Scale (Continued)

Note:

If you first receive an

Unable to Zero - Try Again

notification, the scale attempts to set the scale to zero again for

30 seconds. After three attempts, the scale system locks and an

Unable to Zero

notification appears.

Menu display

The

footboard control panel has a menu that displays the menus for

functions and features.

Figure 36: Menu

Acesses menu functions

Display

Displays menu functions

Up arrow

Scroll up through menu functions

Down arrow

Scroll down through menu functions

Exit

Exits from menu functions or cancels
operation

Enter

Selects menu function or saves
operation

Menu functions

1. Weight Log (Weight log is the default selection)

5. Scale Units (Change scale units)

2. Gain/Loss

6. Backlight (Backlighting)

3. Change Equip. (Change equipment)

7. Advanced Options

4. Change Ptnt Wght (Change patient weight)

8. Exit Menu

Summary of Contents for S3 MEDSURG BED
















































































Search results

Summary of Contents for S3 MEDSURG BED

Reviews:

Stryker S3 MEDSURG BED, Operation Manual, Page: 51 / 79

Search results

Summary of Contents for S3 MEDSURG BED

Reviews: