Stryker S3 MEDSURG BED Operation Manual Download Page 12

Page: 12 / 79

3006-209-001 REV B

www.stryker.com

Introduction

Expected service life

The 3002

MedSurg bed has a ten year expected service life under normal use conditions and with appropriate

periodic maintenance.

The optional motion/nurse call pendant has a two year expected service life under normal use conditions.

The optional motion/nurse call/SmartTV pendant has a two year expected service life under normal use conditions.

The optional

Bed

Wireless components have a three year expected service life under normal use conditions.

Contraindications

None known.

Specifications

Safe working load

Note:

Safe working load indicates the sum of the

occupant and accessory weight.

500 lb

227 kg

Product weight

570 lb

259 kg

Scale system capacity (optional equipment), loads weighing up to:

500 lb

227 kg

Scale system accuracy (optional equipment)

± 3 lb for patients weighing 50 to 100 lb
± 3% of the total patient weight for patients
weighing 100 to 500 lb

Overal length and width

Siderails up

95 in. x 41.5 in.

241.3 cm x 105.4 cm

Siderails down

95 in. x 39.5 in.

241.3 cm x 100.3 cm

Patient sleep surface

84 in. x 35 in.

213.4 cm x 88.9 cm

Bed height to top of seat litter with 6” casters

Standard bed

16 in. to 30 in.

40.6 cm to 76.2 cm

With battery backup
/

Zoom®

19.5 in. to 30 in.

49.5 cm to 76.2 cm

Litter platform to top of siderail

(full up)

Head end siderail

15 in.

38.1 cm

Foot end siderail

15.5 in.

39.37 cm

Space between siderails (full up)

2.5 in.

5.72 cm

Gatch position

0° to 45°

Fowler position

0° to 60°

Trendelenburg and Reverse Trendelenburg

+10° to -10° ± 1°

Electrical requirements - all electrical requirements meet UL 2601
specifications

115 VAC, 60 Hz, 8 A

Outlet option

110 VAC, 60 Hz, 10 A

Battery voltage

(2) 12V 31Ah - Battery backup /

Zoom

(gel

cell battery)

(1) 9V - Nurse call option (alkaline battery)

Summary of Contents for S3 MEDSURG BED
















































































Search results

Summary of Contents for S3 MEDSURG BED

Reviews:

Stryker S3 MEDSURG BED, Operation Manual, Page: 12 / 79

Search results

Summary of Contents for S3 MEDSURG BED

Reviews: