•
Syn-Tech grease (3000-200-719)
P
Prro
occe
ed
du
urre
e::
1. Raise the product to the highest height position.
2. On the footboard control panel, press E
En
ntte
err to access the S
Se
ettttiin
ng
gss menu.
3. Highlight S
Sh
hu
uttd
do
ow
wn
n and press E
En
ntte
err.
4. Unplug the power cord from the wall outlet.
5. Push down on the brake pedal to apply the brake.
6. Raise both foot end siderails to the up and locked position.
7. Using a small flat screwdriver, release the power/sensor cable quick connect and disconnect the cable from the
actuator. When re-connecting the cables, fully seat and lock the cable quick connector retaining ring.
8. Using needle nose pliers, remove both rue ring retaining clips from the clevis pins that attach the actuator to the litter
weldment and fowler weldment.
9. While supporting the actuator with one hand, remove the head end clevis pin and foot end clevis pin and then lower the
actuator down.
N
No
otte
e -- Apply a thin coat of Syn-Tech grease to the clevis pin when you reinstall.
10. Reverse steps to reinstall.
11. Verify proper operation of the product before you return it to service.
T
Th
hiig
gh
h a
accttu
ua
atto
orr rre
ep
plla
acce
em
me
en
ntt
T
To
oo
ollss rre
eq
qu
uiirre
ed
d::
•
Needle nose pliers
•
Small flat screwdriver
•
Syn-Tech grease (3000-200-719)
P
Prro
occe
ed
du
urre
e::
1. Raise the product to the highest height position.
2. On the footboard control panel, press E
En
ntte
err to access the S
Se
ettttiin
ng
gss menu.
3. Highlight S
Sh
hu
uttd
do
ow
wn
n and press E
En
ntte
err.
4. Unplug the power cord from the wall outlet.
5. Push down on the brake pedal to apply the brake.
6. Raise both foot end siderails to the up and locked position.
7. Using needle nose pliers, remove the rue ring retaining clip from the head end clevis pin that attaches the actuator to the
litter weldment.
8. Using needle nose pliers, remove the circle ring retaining ring from the foot end clevis pin that attaches the actuator to
the thigh weldment.
9. While supporting the actuator with one hand, remove the head end clevis pin and the foot end clevis pin and then lower
the actuator down.
N
No
otte
e -- Apply a thin coat of Syn-Tech grease to the clevis pin when you reinstall.
10. Using a small flat screwdriver, release the power/sensor cable quick connect and disconnect the cable from the
actuator. When re-connecting the cables, fully seat and lock the cable quick connector retaining ring.
11. Reverse steps to reinstall.
N
No
otte
e -- Route the power/sensor cable over the top of the actuator when you reinstall the actuator.
12. Verify proper operation of the product before you return it to service.
EN
30
5900-009-002 Rev A.0
Summary of Contents for MV3 5900
