Stryker L10 Instructions For United States Users Download Page 5

Page: 5 / 52

Warnings and Cautions

Please read this manual and follow its instructions carefully. The words

warning, caution, and note carry special meaning and should be carefully

reviewed:

Warning

Indicates risks to the safety of the patient or user. Failure to

follow warnings may result in injury to the patient or user.

Caution

Indicates risks to the equipment. Failure to follow cautions

may result in product damage.

Note:

Clarifies the instructions or presents additional useful information.

An exclamation mark within a triangle is intended to alert the

user to the presence of important operating and maintenance

instructions in the manual.

A lightning bolt within a triangle is intended to warn of the

presence of hazardous voltage. Refer all service to authorized

personnel.

Summary of Contents for L10





















































Search results

Summary of Contents for L10

Reviews:

Related manuals for L10

Brands by name

Popular brands

Stryker L10, Instructions For United States Users

Search results

Summary of Contents for L10

Reviews:

Related manuals for L10

Brands by name

Popular brands