Stryker L10, Instructions For United States Users

Page: 35 / 52

31
Maintenance
Cleaning the Light Source
Should the light source console need cleaning, follow the warnings, cautions,
and instructions below. The user shall provide the mild detergent (or standard
disinfectant) and sterile cloth required for cleaning.
To avoid electric shock and potentially fatal injury, disconnect
the console from the AC power source before cleaning.
Observe the following cautions to avoid damaging the console:
• Do not sterilize the console.
• Do not immerse the console in any liquid.
• Do not allow liquid to drip onto the console or collect on any
of its surfaces.
• Do not spray cleaning liquid directly onto the console,
power buttons, or connectors. Spray the cleaning liquid onto
a cloth, and use the cloth to wipe the console.
• Do not clean the console with abrasive products or corrosive
cleaning solutions.
1. Spray a mild detergent or standard disinfectant onto a dry, sterile cloth.
Do not saturate the cloth.
2. Wipe the console. Do not allow liquid to drip from the cloth or collect on
the console.
3. When cleaning the front LCD screen, use extra care to prevent liquid from
dripping or pooling on the bottom of the screen. Excess liquid can enter
the console and cause product damage.
4. Visually inspect the external surface of the device for cleanliness, focusing
on hard-to-reach areas. If visible soil remains, repeat steps 1– 3.
Inspection
Inspect the device on a continual basis for unacceptable deterioration such
as (but not limited to) corrosion, discoloration, pitting, cracked seals, or
abnormal noises. If a problem is observed or suspected, the device should be
returned for service.