FFiigguurree 2244 –– RReessoonnaattoorr
3. Pull to disconnect each of the hoses from the resonator (AG) and the manifold (Figure 24).
4. Remove and discard the resonator.
NNoottee -- During reinstall, make sure that the compressor supply hose is not kinked or bent.
5. Reverse steps to reinstall.
NNoottee
• During reinstall, align the VVeellccrroo® patches.
• After installation, remove the zipper pull tool or equivalent from the zipper.
• Cover the zipper with the support surface cover watershed.
6. Verify proper operation before you return the product to service.
TTuurrnn bbllaaddddeerr aasssseem
mbbllyy rreeppllaacceem
meenntt
TToooollss rreeqquuiirreedd::
• Zipper pull tool or equivalent
• Diagonal pliers
PPrroocceedduurree::
1. Remove the top cover. See
(page 24) for removal.
EN
46
2972-009-002 Rev AA.0
Summary of Contents for Isolibrium 2972
