Stryker Gynnie, Maintenance Manual

Page: 23 / 84

B
C
D
E
F
H
L
M
N
J
A
K
F Fiig gu urre e 6 6 –– P Po op pp pe ett vva allvve e rre ep plla acce em me en ntt
14. Raise the jack to the highest position.
15. Apply weight and make sure that the jack holds its position and that there are no hydraulic leaks.
16. Reverse steps to install the hood and the litter.
17. Verify proper operation before you return the product to service.
H Hyyd drra au ulliicc cch he ecckk vva allvve e rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• 3/8” open end wrench
• Stiff wire (bent, pointed end)
• 1/2” diameter rod
• Torque wrench (ft-lb)
P Prro occe ed du urre e::
W WA AR RN NIIN NG G
• Always remove the litter and the base hood before you begin service on the jacks to avoid personal injury or damage to
the product.
• Always lower the jack rod completely to relieve the pressure on the pump piston side of the jack to prevent hydraulic fluid
loss and product damage when the base plugs are removed.
1. Raise the litter to the highest position.
2. Raise the Fowler backrest to the upright position.
3. Raise the siderails to the up and latched position.
1061-009-002 Rev A.0 19 EN