manualshive.com logo in svg

Stryker Epic, Operation Manuals

Share
Download
Stryker Epic Operation Manuals Download Page 12

11

Siderail Operation Guide

INSIDE SIDERAIL FUNCTION GUIDE

1.

Press to raise knee section.

2.

Press to raise back section.

3.

Press to lower knee section.

4.

Press to lower back section.

 The following functions are optional equipment.

5.

Press to activate the nurse call.

6.

Press to turn on the TV or radio.  Press again to change TV channels and to turn off the TV.

7.

Press to increase the TV or radio volume.

8.

Press to decrease the TV or radio volume.

9.

Press to turn on the room lights.  Press again to turn off.

10.

Press to turn on the reading light.  Press again to turn off.

11.

Press to increase the firmness of the mattress.

12.

Press to decrease the firmness of the mattress.

  WARNING

When attaching equipment to the bed, ensure it will not impede normal bed operation.  For example: hooks
on hanging equipment must not actuate control buttons, equipment must not hide the nurse call button, etc.

Beds with All Options (Including Standard TV/Radio)

Summary of Contents for Epic


































Reviews:

No comments

Brands by name

Popular brands

Load more brands