Stryker Epic II 2030, Operation Manual, Page: 3 / 38

2
Introduction
INTRODUCTION
This manual is designed to assist you with the operation of the Stryker Model 2030 Epic II and Epic II +
Critical Care Beds. Read it thoroughly before using the equipment.
SPECIFICATIONS
Safe Working Load 500 pounds (227 kilograms)
Scale System Capacity (optional equipment) Loads weighing up to 500 pounds (227 kilograms)
Scale System Accuracy (optional equipment)
$
1 pound of total patient weight at any bed position
(patients weighing 100 pounds or less)
$ 1% of total patient weight at any bed position
(patients weighing greater than 100 pounds)
Overall Bed Length/Width L − 91” /W − 42.5” or L − 231 cm /W − 108 cm
Minimum/Maximum Bed Height (Standard)
Minimum/Maximum Bed Height (Enhanced)
18” to 32.5” $ 0.5 / 46 cm. to 82.5 cm.
19.5” to 34.5” $ 0.5 / 49.5 cm. to 88 cm.
(Add 2 inches if the bed has 8” casters.)
Fluoro Access 17.5” (Epic II ), 16” (Epic II +)
Knee Gatch Angle 0 to 30
Back Angle 0 to 90
Trendelenburg/Reverse Trendelenburg − 12 to +12 $ 2
Electrical Requirements 115 VAC, 60 Hz, 7.0 Amps
230 VAC, 50/60 Hz, 4.0 Amps
100 VAC, 50/60 Hz, 9.0 Amps (Japan Option)
Battery Voltage (optional equipment) 24 V, 31 Ah
Noise Level > 65 Decibels
Outlet Option 125 VAC, 5A, 60 Hz
If the bed is equipped with the enhanced height option, the scale accuracy is as described above for litter angles from 0 to $ 5 Trend.
Stryker reserves the right to change specifications without notice.