manualshive.com logo in svg

Stryker Epic II 2030, Operation Manual, Page: 16 / 38

Share
Download
Stryker Epic II 2030 Operation Manual Download Page 16

15

Foot Board Operation Guide

FOOT BOARD CONTROL PANEL GUIDE (CONTINUED)

LED Display Panel Guide

The LED DIsplay Panel is located at the foot end of the bed, below the Control Panel.

”POWER” 

−

 will light when the bed is plugged into the wall receptacle or the battery power switch is on.  Will

blink if the 9V Nurse Call battery needs to be replaced.
”BED MOTION LOCKED” 

−

 will light when the Bed Motion Lock has been activated.

Function Lockout System Usage

1. To lock out all bed motion switches on the bed, press the ”ON/OFF” switch in the ”Siderail Control Lock-

outs” module.  The “padlock” symbol on the control panel will be lighted when that function is locked out.

2. To lock out the bed movement functions on the siderails and prevent the patient from changing the posi-

tioning of the bed, press the ”BACK” or ”KNEE”  switch in the ”Siderail Control Lockouts” module.  The

”padlock” symbol on the control panel will be lighted when that function is locked out.

3. To lock out the bed up/down motion on the siderails, press the Up/Down switch in the ”Siderail Control

Lockouts” module.  The “padlock” symbol on the control panel will be lighted when that function is locked

out.

 CAUTION

The lockout buttons on the foot board lock the Fowler, Gatch and Bed Up/Down functions and prevent motion

of the bed.  It is the responsibility of attending medical personnel to determine whether these functions should

be locked and to use the buttons accordingly.

Summary of Contents for Epic II 2030







































Reviews:

No comments