manualshive.com logo in svg

Stryker Epic II 2030, Operation Manual, Page: 14 / 38

Share
Download
Stryker Epic II 2030 Operation Manual Download Page 14

13

Siderail Operation Guide

INSIDE SIDERAIL FUNCTION GUIDE

Beds with All Options (Including Smart TV)

1. Press to raise knee section.
2. Press to raise back section.
3. Press to lower knee section.
4. Press to lower back section.

 The following functions are optional equipment.

5. Press to activate the nurse call.
6. Press to turn the TV on.  Press again to turn off the TV.
7. Press to increase the TV or radio volume.
8. Press to decrease the TV or radio volume.
9. Press to turn on the room lights.  Press again to turn off.

10. Press to turn on the reading light.  Press again to turn off.
11. Press to change the TV channel up.
12. Press to change the TV channel down.
13. Press to mute the TV sound.  Press again to turn the sound back on.
14. Press to display TV closed captioning.

  CAUTION

When attaching equipment to the bed, ensure it will not impede normal bed operation.  For example: hooks

on hanging equipment must not actuate control buttons, equipment must not hide the nurse call button, etc.

Summary of Contents for Epic II 2030







































Reviews:

No comments