Stryker 6082 RUGGED MX-PRO Manual Download Page 37

Page: 37 / 105

Preventative Maintenance

BASE LUBRICATION

NOTE

The

MX−PRO

has been designed to operate without the need for lubrication. Tri−Flow

with Teflon

lubricant may be used to reduce the force required to raise the undercarriage and to minimize

wear. Do not use silicone, WD−40

, or lithium grease. They could harm the moving parts of the cot.

FOOT END

APPLY LUBRICATION

Figure 37 − Base Lubrication Locations

Place the cot in the highest position.

Turn the cot upside down with the base legs facing up.

Using the plastic applicator tube, spray Tri−Flow

with Teflon

lubricant (Stryker part number

6082−199−12) in the gap between the upper (item A) and lower lift tubes (item B) on both foot end legs.

Let the cot sit for 5 minutes.

Turn the cot back over. Raise and lower the cot a few times to work the lubricant through the base tubes.

Wipe any excess lubricant from the base tubes.

Summary of Contents for 6082 RUGGED MX-PRO










































































































Search results

Summary of Contents for 6082 RUGGED MX-PRO

Reviews:

Related manuals for 6082 RUGGED MX-PRO

Brands by name

Popular brands

Stryker 6082 RUGGED MX-PRO, Manual

Search results

Summary of Contents for 6082 RUGGED MX-PRO

Reviews:

Related manuals for 6082 RUGGED MX-PRO

Brands by name

Popular brands