SG900
16
STRYKER T-TOPS ALWAYS USES PREMIUM
MARINE CANVAS MATERIAL BY SUNBRELLA
Start with a knot at the rear of the top to keep the cord in place. Follow the diagram below to secure the
canopy through each successive hole. After the final hole, go back through each loop to remove any excess
slack to tighten it down as much as possible. Complete the process by tying a final knot. The canopy should be
drum-tight with just a little gap between the outer edge of the canvas and the inside of the top’s tubing.
After you have installed your Stryker T-Top, take some photos and send them to us. We’ll add your boat to
our customer photo gallery, send you a free tee shirt and enter you into our regular drawings for big prizes!
We love seeing scenic photos out on the water and active fishing shots. Simply complete the gallery form on
our website at
https://strykerttops.com/submit-customer-gallery
You can also post photos of your boat with a Stryker T-Top installed using the hashtag
#mystrykerttop
STEP 17
Add Your Boat to Our Customer Gallery!
R O P E T H E C A N O P Y
A drum-tight canopy will extend the fabric’s
life by avoiding damage from excessive wind
movement and by allowing water to roll off
instead of pooling up which can stretch, sag
and weaken the material.
1
2
3
4
TIE A KNOT AT EACH END TO
START AND STOP THE CORD
Instaation Complete!
C O N G R A T U L A T I O N S O N F I N I S H I N G Y O U R S T R Y K E R T - T O P I N S T A L L A T I O N
PRO TIP
