SG900
8
Measure and record the distance between each leg section.
We recommend measuring from the inside of the left and
right leg section. Since you have outlined each foot on the
tape, you can use those lines for your measurement.
You will be assembling the t-top OFF the boat. You need to
know how far apart to mount the leg sections to the canopy
frame top section. After that, you will move the completed
frame on the boat and line it up on the tape.
Mount the assembled top front section to the leg sections. Use two clamp bolts per clamp. Make
sure the distance between the feet matches step 7. Also, compare the distance between each
clamp and the outside tubing to make sure everything is centered. Each bolt needs thread locker
but don’t apply it until you are sure everything is positioned correctly first.
STEP 7
M E A S U R E W I D T H B E T W E E N L E G S
STEP 8
A S S E M B L E L E G S T O T H E T O P S S E C T I O N
STEP 9
S E T T - T O P F R A M E O N T H E D E C K
THREAD
LOCKER
O N L Y A P P L Y T H R E A D L O C K E R A F T E R
D O U B L E C H E C K I N G M E A S U R E M E N T S !
S G 3 0 0 M O D E L S H O W N H E R E
Carefully move the frame to your
boat and gently set it down on
the taped area on the deck.
Line up each of the feet
so they are all resting inside
the four outlines you made earlier.
