Struers Discotom-6 Instruction Manual Download Page 141

Page: 141 / 149

Struers’ products are subject to constant
product development.
Therefore, we reserve the right to introduce
changes in our products without notice.

Technical Data

Cutting Motor

Cutting power constant [S1]

2.2 - 3.0 kW

3.0 - 4.0 HP

Cutting power intermittent [S3, 15%]

3.2 - 4.0 kW

4.3 - 5.4 HP

Maximum power

4.4 - 6.0 kW

6.0 - 8.0 HP

Cut-off Wheels

Cut-off wheel size: 250 mm x 1.5 mm x 32 mm (10" x 0.06" x 1.25")

Rotational speed (running idle): 2850 rpm at 50 Hz, 3420 rpm at 60 Hz

Cutting Table

Cutting table dimensions

Width: 386 mm

Length: 225 mm

Dimensions

Discotom-6 without recirculating cooling unit

and Weight

Width: 794 mm (31.3")

Depth: 640 mm (25.2")

Height: 458 mm (18.1")

Weight: 123 kg (272 lbs)

Struers’ equipment is in conformity with the provisions of the applicable International Directives and their
appurtenant Standards. (Please contact you local supplier for details)

Speciﬁcations

Cat.

no.

Discotom-6

056761xx

Automatic cut-off machine. Automatic feed with electronic control of feed speed.
Ability for manual operation. 3.7 kW (5.0 HP) motor. For 250 mm (10") cut-off wheels.
Cutting table with 10 mm T-slots. Recirculation cooling unit (05766xxx), quick-clamping
devices (005876910) or vertical clamping system (05116905) are ordered
separately. Optional table unit (05116916) can be used.

Cat.no

Voltage

05676129

3 x 200 V / 50 Hz

05676130

3 x 200-210 V / 60 Hz CSA

05676135

3 x 220-230 V / 50 Hz

05676136

3 x 220-240 V / 60 Hz CSA

05676146

3 x 380-415 V / 50 Hz

05676147

3 x 380-415 V / 60 Hz

05676154

3 x 460-480 V / 60 Hz CSA

Accessories

Cooling System 3

05766xxx

With 50 l tank, small pump, Cooli-1, 50 l static ﬁlter with ﬁlter paper

Adjustable Cutting Table

05116902

For cutting plane parallel sections. It positions the workpiece at a right angle to the
cut-off wheel. Movable up to 60 mm. With 10 mm T-slots and exchangeable stainless
steel bands

Spring Clamp for 10 mm T-slots, Right

05116904

For retaining the cut-off specimen. Complete with back stop. To be mounted at the right
hand side of the cut-off wheel

Vertical Clamping System for 10 mm T-slots

05116905

For clamping irregularly shaped workpieces on the cutting table. Clamping height adjustable
up to 58 mm. Complete with operating key and one ﬂat clamping shoe

Quick Clamping Tool for 10 mm T-slots, right

05876910

For securing the workpiece. To be mounted on the right side of the cut-off wheel.
Complete with backstop. Max clamping width: 50 mm

Quick Clamping Tool for 10mm T-slots, left

05876909

For securing the workpiece. To be mounted on the left side of the cut-off wheel.
Complete with backstop. Max clamping width: 50 mm

T-slot Turntable for 10mm T-slots

05876905

0-90 degree turntable for angular cutting. For use with various 10 mm T-slot clamping tools.
Table height 42 mm.

Riser Block for 10 mm T-slots

05116910

For elevating Vertical Clamping System (05116905) when clamping high workpieces.
To increase the clamping heigth by 60 mm