Structural Concepts Impulse 62486, Operating Manual, Page: 57 / 66

57
FIELD WIRING BOX / ELECTRICAL WIRES / DRAIN / REFRIG. / FLUORESCENT LIGHTS & SWITCH
1. Field-Wiring Box, Electrical Wires (from Upper
Section), and Drain Parts & Location

See illustration below.

Caution! Only certified electricians are to perform
electrical connectivity duties.

Note: Drain Parts Are Shipped Loose and
Must Be Positioned and Connected Per Field
Conditions!
2. Field Hookup of Refrigeration Line

See illustration below.

Caution! Only certified refrigeration engineers are
to perform refrigeration connectivity duties.
3. Light Fixtures
Light fixtures are located at the underside of shelf
assemblies. See illustration below for locations.
Warning! Disconnect power before providing
maintenance and service to unit.
Caution: Lamps are treated to resist breakage;
replace with similarly treated lamps.
Field Wiring
Box
Electrical Wires
From Upper
Section
Note: Warranty will be void if claims arise from
negligence, misuse of goods, extreme
environmental conditions or improper
maintenance. See OVERVIEW / NSF® TYPE /
COMPLIANCE / WARNINGS / PRECAUTIONS /
WIRING / GFCI / WELLS section in this manual.
Removal of lamps:

Rotate lamp (1/4-turn) to disengage (upper or
lower) pins/contacts from mounting sockets.

Remove bulb by applying even pressure from
back side at the bulb ends and pulling the
remaining contact from sockets.

See illustrations below-right.
Installation of lamps:

Align pins with slot.

Insert pins into socket by rotating the bulb
1/4-turn to secure either the (upper or lower)
pin contacts into the sockets.

Rotate remaining bulb contacts (1/4-turn) into
remaining lamp mounting socket contacts.

See illustrations below-right.
Note: Drain Parts Are
Shipped Loose! Drain
Must Be Positioned and
Connected Per
Field Conditions!]
Refrigeration
Lines (From
Factory)
Light
Switch
Light and
Connector
Storage Drawer
[Non-Refrigerated]