manualshive.com logo in svg

Structural Concepts Impulse 62486, Operating Manual, Page: 54 / 66

Share
Download
Structural Concepts Impulse 62486 Operating Manual Download Page 54

54 

DISPLAY CASE  #4: NAPKIN-UTENSIL-TRASH BIN END CAP MODEL CB6T.4764 

Display Case #4 

This section pertains only to Trash /

Napkin Cabinet Model CB6T.4764 

1. Trash Bin Removal 

 



Trash bins are at left and right of case. 



Trash bags are removable from each trash bin.   



See illustrations below.   



To remove trash bag, lift bin cover up and off 
trash bin. 



After placing new bag in trash bin, replace bin 
cover over top of trash bin (to hold bag in place). 



Slide trash bin back under display case. 

Napkin     
Dispenser 

Trash Chute 

Napkin Dispenser 

Exploded View of Pulled-Out 

Trash Bin Drawer Assembly 

Bin Cover 

Bin Rail 

Trash 
Bin 

2. Napkin Dispensers / Utensil Dispenser / 
Trash Dispenser 

 



See illustration below for location of items 



See 

TRASH BIN REMOVAL / TRASH CHUTE 

REMOVAL (FOR CLEANING PURPOSES)   

section in this manual for breakdown of unit. 



See 

CLEANING SCHEDULE -  GENERAL 

for 

schedule and method of cleaning this Napkin / 
Utensil / Trash End Cap as well as the Trash 
Bin Drawer Assembly.  

Summary of Contents for Impulse 62486



































































Reviews:

No comments