background image

Page 5 of 12 

 

insulated and contact will cause electrical shock. 

 

Keep children and bystanders away from the work area while operating the tool. Do not allow 
children to handle the product.  

 

Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your 
work area. Some of these hazards may be hidden from your view and may cause personal injury 
and/or property damage if contacted. 

 

WARNING

 

PERSONAL SAFETY 

 

Stay alert, watch what you are doing, and use common sense when operating the strap puller. Do 
not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A 
moment of inattention while operating the tool may result in serious personal injury. 

 

Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing 
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving 
parts. Air vents on the tool often cover moving parts and should be avoided. 

 

Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety 
goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in 
dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems, 
and hearing protection when appropriate. This applies to all persons in the work area.  

 

Do not overreach. Keep proper footing and balance at all times.

 

 

 

CAUTION

 

STRAP PULLER USE AND CARE 

 

Do not force the strap puller. Products are safer and do a better job when used in the manner for 
which they are designed. Plan your work, and use the correct product for the job. 

 

Check for damaged parts before each use. Carefully check that the product will operate properly 
and perform its intended function. Replace damaged or worn parts immediately. Never operate the 
product with a damaged part. 

 

Store the strap puller when it is not in use. Store it in a dry, secure place out of the reach of 
children. Inspect the tool for good working condition prior to storage and before re-use. 

 

Use only accessories that are recommended by the manufacturer for use with your product. 
Accessories that may be suitable for one product may create a risk of injury when used with 
another tool. Never use an accessory that has a lower operating speed or operating pressure than 
the tool itself.

 

Specific Operation Warnings 

WARNING

 

 

Do not exceed the rated load capacity. 

Summary of Contents for 61126













Reviews: