CONTENTS OF THIS PACKAGE.
Please check that the following components have been included in your
package. If any of the following pieces are missing, please contact us imme-
diately.
•1- STRONGHOLD Chuck assembly with No. 2 Top Jaws attached
•1- Geared Chuck Key
•1- 1-1/2" R.H. Jumbo Screw
•1- Taperlock adaptor*
•2- M5 * 20 Hex socket screws*
•1- 4 mm T-handle hex key
*The adaptor may be packaged separately. If your adaptor is not already installed in your
chuck, installation instructions are on page 8.
2
Congratulations on your purchase. We at ONEWAY believe that you will be
pleased with your versatile STRONGHOLD Key Operated Scroll chuck.
Please read the following instructions before its use.
* Section 1 - Your STRONGHOLD
& its parts
Contents of this package
Chuck Description
Features of your STRONGHOLD
Why you have bought a superior chuck
* Section 2 - Getting Started
Mounting the Adaptor
Removing the Adaptor
Mounting the STRONGHOLD on your
lathe spindle
* Section 3 - Maintenance
Removing Top Jaws
Removing Base Jaws
Reassembling your STRONGHOLD
This section explains the proper terms for the component parts which make
up your new STRONGHOLD chuck. These terms will be referred to
throughout this instruction manual. It is necessary that you know the proper
names for the parts of your chuck for complete understanding of these
instructions. Some of the chuck's features are also discussed.
Certain features of the STRONGHOLD are patented under one or more of
the following patent numbers:
5141239
2257068
(other patents pending at the time of printing this manual)
SECTION 1 - YOUR STRONGHOLD & ITS PARTS
* Section 4 - Chuck Accessories
Optional Chuck Accessories & Uses
Capacity Chart
* Section 5 - ONEWAY Turning Tips
Methods for turning Bowls/Platters:
Method One: Screwchucking
Method Two: Large Drill
Method Three: Glue Block
Differentiating Left & Right Hand
Screws
Maximizing Gripping Power
A Finishing Tip
Safety Tips
ONEWAY's
Guarantee
Warranty Card.
TABLE OF CONTENTS:
3
