Time Offset
:
This setting allows you to change the time zone (or GMT) if necessary. Press
OK
button to open the pop-up menu and use
pq
to make your selection.
Confirm with
OK
.
Region
:
This setting allows you to change the Country. Consider that this will also
affect the time if you select a country with a different GMT. Press
OK
button
to open the pop-up menu and use
pq
to make your selection. Confirm with
OK
.
Time format
:
This setting allows you to view the time in 24H or 12H format. Press
OK
button to open the pop-up menu and use
pq
to make your selection.
Confirm with
OK
.
7.3.5 Timer
This menu allows you to set the timers according to your needs, without being tied to the times set by
the EPG function. In this menu you can set 3 different types of timers:
Channel Change
,
Power On
and
Power Off
. To create a new event press
GREEN
button. The available settings are listed below:
Mode
:
This option allows you to set the type of timer to activate. Use
t
u
button
to choose from the following options:
Channel Change
to tune the receiver
to the channel and time set in the following settings,
Power Off
to put the
receiver on standby at the set time and
Power On
to switch on the receiver at
the time and on the set channel.
Channel
:
Here you can set the channel to be displayed. Use
t
u
buttons to set the
channel or press
OK
button to display the entire channel list, use
pq
to
select the channel and confirm with
OK
.
Start Date
:
Use
0~9
buttons to set the time to activate the timer.
Reminder
:
Here you can set the advance in which to signal the start of the timer. Use
t
u
button to set the time.
Cycle
:
This option allows you to establish the repetition of the event. The options
are:
Every Day
to repeat the operation every day,
Every Week
to repeat the
operation every week,
One Time
to activate the event are the day and date
set. Press
t
u
to make your selection.
The set data will be saved when you exit the menu. Press
EXIT
button and select
OK
. Selecting
Cancel
the
timer will not be activated.
To delete a timer press the
RED
button, to delete one or more timers press the
YELLOW
button. For both
operations, confirm the operation by selecting
OK
or reject by selecting
Cancel
.
7.3.6 Lock
Access to this menu requires the insertion of the PIN code as it allows the modification of privacy
settings. In fact here it is possible to change the PIN code and set the Parental Rating level.
The available settings are shown below:
Parental Rating
:
This setting allows you to enable (or disable) the
Parental Rating function
.
Whenever a channel reports a rating higher than the one set, the receiver will
block the content and will request the PIN code to be entered. Entering the
correct code will unlock the channel. Available settings are:
PG-18
,
PG14
,
PG7
and
None
to disable the lock. Press
t
u
to make your selection.
New Password
:
Use
0~9
buttons to set the new PIN code.
Confirm Password
:
Use
0~9
buttons to confirm the new PIN code.
16