4.1 Language, audio and video
The receiver turns on displaying the Welcome message, press
OK
to go to the next step. In this page it
is possible to set
Language
,
Resolution
,
Aspect Ratio
and
Audio Format
. Press
OK
to select the option you
need to change then
pq
to change selection. To confirm and exit press
OK
.
Select
NEXT
and confirm with
OK
to continue the installation.
4.2 PIN code creation
Create and confirm the PIN code, then select
NEXT
to continue.
4.3 Satellite System
In this page it is possible to set the
LNB
,
Antenna type
and
LNB Power
. The default settings are for a system
with universal LNB, in case you want to change the default settings please check the
8.1.1 Antenna
Setting
chapter.
To go to the next step select
NEXT
and confirm with
OK
to continue the installation.
4.4 Search Channel
On
Transponder
select
All
(default setting) to search on all available frequencies or select a single TP for
a targeted search. On
Type of search
please set the search type choosing between
Tivùsat+FTA
, to store
the FTA (free to air) and Tivùsat channels,
All
to store all the channels and
FTA Only
to store only the FTA
programmes.
To start the channel search, select
NEXT
and confirm with
OK
.
NOTE:
If you see the messages
No list found
or {No channels found, please check
the antenna connections and signal levels of the satellite dish.
4.5 End of installation
At the end of the installation wizard, the last two steps concern the information regarding smartcard
activation and the instructions for downloading the Tivùsat program guide.
To go to the next step confirm with
OK
.
5.0 QUICK GUIDE FOR USING YOUR RECEIVER
We at STRONG understand that you can't wait to enjoy your new tivùsat receiver.
However, we advise you to read this manual to get the best performance from your STRONG tivùsat
receiver. To turn your receiver
ON
or to go to Standby mode, press
q
on the remote control. Choose
channels with
CH+/-
. Alternatively, you can also enter the channel number with the
0~9
buttons on the
remote control or press
OK
in viewing mode to display the channel list. The volume can be adjusted with
VOL+/-
or with
t
u
.
The keys with relative functions available in viewing mode, are listed here below:
n
INFO key: show infobar
n
FAV key: show favorite group (to create new favorite channel lists see
chapter 8.2.2
).
n
OK key: show current channels list.
n
SUB key: show subtitle list.
n
AUDIO key: show audio list.
n
RED key: show Video Output.
n
MEDIA key: for direct acces to media menu.
8