Strong SRT 8203, User Manual

Page: 30 / 37

26
English
Online-Weather
This application allows you to get information about the current conditions of weather and short
weather forecast for next 5 days in your region from the internet.
Use the buttons from the helpline to manage the playlist.
Online-Video
This application allows you to get access to public sources (like YouTube) in your region from the
internet.
Use the buttons from the helpline to manage the playlist.
Online RSS news
This application allows you to get access to few local news sources (like Google News) in your region
from the internet.
Use the buttons from the helpline to manage the playlist.
For more details how to use internet services, please contact the local Service Hotline or send an email to
our Support via www.strong.tv
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact
your dealer or the local Service Hotline. Do NOT try to open or disassemble the receiver. It may cause a
dangerous situation and warranty will be void.
Problem Possible cause What to do
The mode
indicator does
not light up.
Power adapter is not connected to
the outlet.
Check the connection of the receiver to the
power adapter and the adapter to the mains.
The power adapter of the receiver
is connected to mains through an
extender and the power switch on
the extender is in OFF position.
Turn the power extender ON.
No signal. The antenna is disconnected. Check the antenna cable.
The antenna is damaged or not
aligned.
Check the antenna and the position of the
antenna.
The cable between the antenna
and the receiver is damaged.
Possible bad connections in the
cable system.
Make sure that the cable is in good condition.
Check proper connections.
Digital terrestrial broadcast is
absent in the territory.
Check with your dealer.
An active antenna which requires
power is connected.
Make sure to enable antenna power from
the receiver menu (see chapter
7.1.3
) or use
external power supply for the antenna.