Strong SRT 8203, User Manual

Page: 22 / 37

18
English
NOTE:
To remove channel from the favourite list please proceed the same way.
Press
TV/R
to switch between TV and radio channels.
Press
EXIT
to confirm and exit from the favourite channel lists sub-menu.
7.3 Preference
Press
MENU
and select the Preference chapter.
This sub-menu allows you to set the preferred parameters for OSD, language, for subtitles and audio.
OSD Language : Select menu and OSD language
OSD Timeout : Define the duration of information banner display in viewing mode. It can be set in
range from 1 to 6 seconds
OSD Transparency :
Define the transparency of menus and other system information windows. It can be
set in range from 0% to 60%
1st Preferred Subtitle :
This setting allows you to define the default subtitle language. Digital TV allows the
operator to transfer subtitles in one or more languages. Select your preferred subtitle
language and the receiver will display the subtitles in that language automatically (if
available). If you do not want to display subtitles, then adjust the setting to
Undefined .
In viewing mode, you can change this selection to a more suitable selection for the
viewed channel, as described in chapter
6.7.
2nd Preferred Subtitle :
Select the preferred 2nd subtitle language if the 1st preference is not available
Hard Hearing : To enable Hard of Hearing mode set On . To disable it set to Off
1st Preferred Audio :
This setting allows you to define the default audio track or language. Digital TV allows
the operator to transmit more than one audio track or language. If a channel has
multiple audio tracks or languages, the receiver will select the suitable audio track
automatically according to your selection. In viewing mode, you can change this
selection to a more suitable for the viewed channel, as described in chapter
6.6.
2nd Preferred Language :
The receiver will use this language if 1st is not available.
NOTE:
Subtitles will be displayed when available. Availability of DVB/HoH subtitles
depends on the local broadcast.
NOTE:
Please also consider that an event may contain "built-in" subtitles which
cannot be disabled.
7.4 Settings
Press
MENU
and select the Setting chapter.
This sub-menu allows you to manage the system settings of your receiver.
7.4.1 Timers
This menu allows you to set up to 27 timed events for switching on the channel, recording or waking up
the receiver from standby mode in a defined time.
The
Timer List will be shown on the screen