6
PART 1 • English
4.0 sTARTIng uP foR ThE fIRsT TImE
If you use your receiver for the first time, the
Welcome
“Easy install” menu appears. Use
pq
to move
the highlight to the setting you wish to alter and use
tu
to change values. Start by selecting your
language using
tu
. Once you have selected your language, press
q
to move the highlight to the
next item and use
tu
to change.
Language:
Select your language.
Region:
Select your region where this receiver is used.
Subtitle:
Select
Normal
to display subtitles per default, Select
Hard of Hearing
to show
HoH subtitles per default. Select
Off
to hide subtitles per default.
Aspect Mode
:
Use this option to select the aspect ratio of your TV and the preferred
conversion method. Options are:
Auto
(automatic detection of aspect ratio),
4:3 Panscan
(Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),
4:3 letterbox
(black bars on top and under the picture on a 4:3 TV) and
16:9
(use this setting for 16:9 TV sets).
Scan mode
:
Select
All
to store scrambled and free to air channels or select
Free
to store
only free to air channels.
Connection
:
Use this option to select the connection to your TV set. Select
HDMI
or
SCART
.
When all settings have been made, move the highlight to
OK
and press ok to continue.
noTE:
Wrong region selection can lead to missing channels or channels being
stored on wrong positions in the channel list.
The receiver will now advance to the
Aerial Adjustment
screen.
This part of the wizard is of great help when setting up your antenna system.
Use
pq
to move the highlight to the setting you wish to alter and use
tu
to change values.
The following settings are available:
Antenna Power
:
Set to
On
if you use an active antenna. When set to
On
, 5 V will be present on
the ANT IN connector of the receiver. Select
Off
for passive antennas.
Beeper
:
Select
On
for an audible indication of signal reception.
Off
turns the
beeper off.
Channel No.
:
Select a channel that is known to carry a broadcast in your region. The
Signal
Strength
and
Signal Quality
bars give a visual indication of the reception.
Adjust your antenna to obtain maximum signal strength and quality.
Once all settings are made, press ok to start scanning.
The receiver will now search for all available channels. Once scanning is finished, the receiver
switches to viewing mode.
TIP:
If the
Welcome
“Easy install” menu does not appear after switching on the
receiver the first time, reset the receiver to factory settings by pressing the
mEnu button and selecting
Load Factory Setting
in the submenu
Tools
.
(Default PIN 0000)
