3
PART 1 • English
En
gl
is
h
1.3 Equipment set-up
We recommend you consult a professional installer to set up your equipment. Otherwise, please
follow the instructions below:
Refer to the user manual of your TV and antenna.
Make sure that the HDMI cable and outdoor components are in a good condition.
Use only a HDMI 1.3 cable or higher for maximum performance.
If you use TV SCART connection, use then well shielded SCART cable.
This manual provides complete instructions for installing and using this receiver. The following
symbols will serve as follow.
mEnu
Represents a button on the remote control or the receiver.
(bold Character)
Move to
Represents a menu item within a window.
(Italic Character)
1.4 Accessories
User manual
1 remote control unit
2x batteries (AAA type)
noTE:
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
1.5 usage of external usb devices
It is recommended to use USB 2.0 storage devices or higher. If your device is not
compatible to USB 2.0 specifications, recording, playback and other multimedia
functions of the receiver might not work properly.
To ensure best performance of your USB storage device please format it by this
receiver (menu “
Media+
”) to FAT32 system. Other file systems are not supported by
the receiver. However, it is possible to use already NTFS formatted disks. STRONG
cannot guarantee compatibility with all types of USB storage devices.
It is advised not to store important information on USB storage devices used with
the receiver. Always make backups of data on your USB storage device before using it
with this receiver. STRONG will not take responsibility for any loss of information or
circumstances caused by loss of information.
2.0 YouR RECEIvER
2.1 PIn-CodE dEfAulT: 0000
2.2 front Panel
Fig. 1
1. usb:
Connector for USB devices.
2. IR sensor:
Point your remote control towards this sensor.
