5
PART 1 • English
En
gl
is
h
3.0 ConnECTIon
3.1 Connecting to a Terrestrial Antenna
Fig. 4
To receive broadcast signal, your terrestrial indoor or outdoor antenna must be connected to the ANT IN
connector on the back of the receiver. Use a properly shielded antenna cable and suitable connectors.
The TO TV connector allows you to loop the antenna signal to a second receiver or TV set.
3.2 Connecting to Tv with hdmI cable
Fig. 4
The TV set shall be connected with the receiver using a good quality HDMI 1.3 or higher cable. This
connection gives the highest possible quality.
3.3 Connecting to Tv with sCART cable
Fig. 4
SRT 8102+ is also equipped with a SCART connector; alternatively, the TV set can be connected to the
receiver using a good quality SCART cable.
3.4 Connecting to a digital Audio Amplifier with s/PdIf
Fig. 4
By connecting your receiver to a digital amplifier or home theatre system, you can enjoy the best possible
sound quality and multi-channel audio (depending on broadcast). Connect your Digital Audio Amplifier or
home theatre system with a suitable cinch cable to the S/PDIF connector on the back of the receiver.
3.5 Connecting to a digital Audio Amplifier and Tv
using hdmI
Fig. 5
By connecting your receiver to the latest digital amplifiers or Home Cinema systems with HDMI
connections, you will enjoy the best possible sound quality and multi-channel audio (depending on
broadcast). Connect the HDMI output of the receiver to an input of your amplifier, and then connect
the HDMI output of the amplifier to your TV set. Select the correct input on your amplifier to watch
and listen to programmes.
3.6 Connecting a usb storage device
Fig. 6
noTE:
We recommend the use of a hard disk drive USB 2.0 or higher for recording
and play back of TV events.
For proper functioning of Time Shift and recording functions, a fast USB device (such as a hard
disk drive) is needed. Interrupted playback or a distorted picture during playback or Time Shift are
indications for a low device speed. STRONG cannot guarantee proper functioning of recoding and or
Time Shift functions with all USB devices.
