14.
MENU
To open the main menu in viewing mode or to go one step back in the menu
15.
Cancellation of current process/exit from main menu to viewing mode
16.
VOL+/-
Increases/decreases the volume level in TV mode
17.
P+/P-
Jumps 10 places up or down in channel list or any other list.
18.
LIST
Displays the channel list.
19.
CH+/-
Channel up/down
20.
OPT
No function.
21.
TEXT
To open or close Teletext if available on the current channel.
22.
SUB
To select subtitles language out of available ones on the current channel
23.
No function
24.
2
Hold play during playback/starting Timeshift mode*
25.
5
Searches backwards during playback/Timeshift*. Each pressing increases the
speed (x2 – x24)
26.
6
Searches forwards during playback/Timeshift*. Each pressing increases the
speed (x2 – x24)
27.
4
Starts recording of the currently watched programme*
28.
PLAY
Starts/resumes the playback/Timeshift*
Shortcut to recordings list in viewing mode.
29.
7
Jumps to the previous file during playback.
30.
8
Jumps to the next file during playback.
31.
3
Stops playback of multimedia files and Timeshift*.
32.
RED
Flexible functions in OSD menu.
33.
GREEN
Flexible functions in OSD menu.
Changes the picture resolution in viewing mode.
34.
YELLOW
Flexible functions in OSD menu.
Changes the picture Aspect Ratio in viewing mode.
35.
BLUE
Flexible functions in OSD menu.
* This user manual describes the full functionality including the recording function and may not be applicable if the software for recording
via USB has not yet been installed.
2.5 Installing the batteries
Fig. 4
Remove the battery cover from the remote control and put 2x AAA size batteries inside the
compartment.
The diagram inside the battery compartment shows the correct way to install the batteries.
1. Open the cover
2. Install batteries
3. Close the cover
NOTE:
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
2.6 Using the remote control
Fig. 5
To use the remote control, point it towards the front of the digital receiver. The remote control has a
range of up to 7 metres from the receiver, if properly aligned towards the IR eye on the front panel.
The remote control will not operate if its path is blocked.
6
