![Strong SRT 7030 User Manual Download Page 12](http://html1.mh-extra.com/html/strong/srt-7030/srt-7030_user-manual_1385103012.webp)
NOTE:
Timeshift/recording and playback only works properly when a fast USB
storage device such as a USB2.0 HDD is connected to the receiver. Timeshift/
recording and playback of HD content requires a sufficient read/write speed
of the used USB storage device.*
* This user manual describes the full functionality including the recording function and may not be applicable if the software for recording
via USB has not yet been installed.
4.0 FIRST TIME INSTALLATION
After all connections have been made properly, switch on your TV and make sure the receiver is
connected to the main power. If you are using the receiver for the first time or restored to factory default,
the
Installation guide
menu will appear on your TV screen. Use
t
u
to select the
OSD
Language
of your
preference. Set the other options as are appropriate for your situation. HDMI output is always available.
TV format with HDMI connection is 16:9 Wide screen.
NOTE:
If Germany is selected as country, a pre-installed channel list is available.
German channels from ASTRA 19.2E will be installed. A pop-up list will show
for selection of the preferred regional channel.
You can continue to
Channel search
and install further channels assumed your dish is pointed at Astra
19° East and/or uses DiSEqC port 1. Or go directly to viewing mode by pressing
OK
to start enjoying the
pre-installed German channels immediately.
4.1 Dish setup
NOTE:
This chapter gives an overview of the possibilities for a quick setup.
In depth explanations you will find in
Chapter 7
.
4.1.1 Installation
The
Installation
menu provides the satellite dish setup.
The menu allows you to set up
Antenna Connection
,
Satellite List
,
Antenna Setup
,
Single Satellite search
,
Multi Satellite Search
and
TP List
.
Press the
MENU
button to enter main menu.
Press
pq
button to highlight “Installation”, press
u
button to enter the “Installation” menu.
Press
p
or
q
button to select the desired item and
press
OK
button to enter the sub-menu.
Press
button to exit.
4.1.2 Antenna Connection
Press
t
u
button to select LNB. LNB includes
Fixed Antenna
and
Motor Antenna
.
8