Factory Setting
Reset your receiver to the default factory settings.
Enter your password or the default password
0000
, select
Yes
and press
OK
to confirm.
The receiver will reboot and start with the
First
Installation
menu.
WARNING:
A factory reset will permanently delete all your personal settings, timers and
stored channels. Please consider this before you perform a factory reset.
Upgrade by USB
Download the required update file for your receiver model from the support page on our website
www.strong.tv or contact your local dealer.
Unzip the file on your computer, if necessary, and copy it to root folder of your USB storage device. The
USB device must have been formatted in FAT32.
Connect the USB storage device to the USB port of the receiver. Press
MENU
and select
Tools
, then
Upgrade By USB
to update the software select at
Upgrade Mode
the option
Allcode
. At
Upgrade File
select
the correct upgrade file, the file has the extension abs.
Then select
Start
, and press
OK
to initiate the upgrade process. An attention banner will now be
displayed. Press
OK
to confirm
Yes
the update (or
No
to cancel it). The update process will take some
time. After the update process has been completed the receiver will restart and then how the first
channel in the TV list. You can now safely remove the USB device, and then remove update software from
the device (at the PC), to prevent accidental updating again.
WARNING:
NEVER power off the receiver or remove the USB device during the software
update process. Doing so might cause irreparable damage to your receiver
and will void your warranty.
NOTE:
In certain instances it can be advised on the website to upgrade the unit
with the
Maincode
option in stead of
Allcode
.
The
bootlogo
and
Radioback
are for Strong internal use.
7.3.7 Dump channel list
7.3.7.1 DB Management
This menu allows you to save and reload the channel Data Base of your receiver from/to a USB-device.
This very convenient feature enables you to save your personal settings like Channel-, Favourite-, Sat-
and TP-lists on an USB storage device and load them back to the receiver later.
Write to USB Dump Channel list
Select
Update Mode
, then
Dump channel list
and
Start
and press
OK
to make a backup of the data base,
including channels and user set data. An.udf file with the current time, date (day, month, year), will be
created on the USB device. When the database has been successfully stored a message will be displayed
on screen. Press
to leave the menu.
27
English
