Strong SRT 5220, User Manual

Page: 10 / 21

PART 1 • English
7
English
8. RS-232 Serial Port
Connect a PC to your receiver to download new software versions.
9. S-VIDEO
To connect to your TV set
10. Main power switch
11. Power Cord
Your receiver requires a voltage of 90 ~ 240 V AC (Auto-selectable), 50 ~ 60 Hz +/-5 %. Make
sure to check the power specification before connecting your receiver to the wall outlet.
3.3 Remote Control
Turns the receiver On/Standby
Mutes audio output of the receiver
PAUSE Freeze/Resume picture
AUDIO Shows list of available audio languages for the channel you
are watching. In addition it sets the current channel audio to
stereo, left-double mono or right-double mono
MENU
Opens the main menu
A->B To transfer selected TV program from 1st to 2nd tuner (e.g. for
recording and watching another programme on the 1st tuner)
A /B To switch between tuner 1 and tuner 2. Show running
program on TV SCART output from VCR SCART / 2nd tuner.
(disables all other buttons when this mode is active)
INFO Shows information of the current channel
P+ / P- Page up and down in menu list
EXIT
Exits from the menu or sub-menu and cancels the progressing
function if applicable
CHANNEL
pq
Menu Off: Change the current program to the previous/next
program.
Menu On: Moves the cursor up/down.
tu
Menu Off: Increases/decreases the volume level.
Menu On: Change the setting values in specific Menu item
V+ / V- Use to increase or decrease the receiver volume level.
OK Activates the highlighted menu item. Displays a channel list
according to TV /Radio Mode
TEXT Shows current service’s Teletext on OSD (On Screen Display)
SUB Show list of subtitled languages current channel is supporting
RCL
Switches back to previous channel
FAV Toggle Favourite mode ON / OFF
TV/R Toggle between TV or RADIO mode