Strong SRT 5220, User Manual

Page: 13 / 21

PART 1 • English
10
5.2 Channel Search
There are 2 items in the Channel Search menu: Automatic Search and Manual Search
5.2.1 Automatic Search
Press OK over the Automatic Search .
The warning message “ Do you want to start Automatic Search? ” will appear. Press LEFT / RIGHT to move
the cursor and OK to continue. The message “ Please press LEFT/RIGHT to choose whether to erase your
previous channel list .” will appear. If you want to cancel channel search press the EXIT button.
On completing the search, the receiver will save automatically the services information and exit to
normal play state.
5.2.2 Manual Search
Press OK over the Manual Search, the Manual Search screen will appear.
Press LEFT / RIGHT to choose channel No. or press numerical buttons to input channel number. Check
indicators of the signal level and quality to make sure the values are entered correctly. Press UP / DOWN
to move cursor to Search and press OK to search current channel. If no service is installed, there will be
the warning “ No Signal ”. Press any key to return.
Tips Different countries have different VHF/UHF frequency plans. It is important to select
the proper region.
5.3 Installation
5.3.1 System Setting
In this menu, you can configure the system settings Language , TV Settings , Country , Channel Numbering ,
Antenna Power , Time Settings , and Factory Default .
5.3.1.1 Language
You can change the language of the OSD and Audio.
Press
UP / DOWN to select the OSD Language or Audio language .
Press OK / RIGHT to enter the language list and Press UP / DOWN to select the language. Press OK
to confirm.
5.3.1.2 TV Settings
You can set TV Standard , TV Format and Video Output .
n
TV Standard
Press OK / RIGHT to select PAL or NTSC and OK to confirm. If you don’t know which standard
your TV has, please select AUTO .
n
TV Format
Press OK / RIGHT to select 4:3 , 4:3 Full or 16:9 , and OK to confirm.
n
Video Output
Press OK / RIGHT to select CVBS , RGB or S-VIDEO , and OK to confirm