21
English
6. Operation
6.6 System Information
Figure 6.6.1
Your receiver displays current information <Figure 6.6.1>
regarding model name, software version and date of
manufacture. This info is useful when downloading new
software.
Please note if you have performed a software update you
must also perform a factory reset of the receiver. Please
see Database Reset section in the Systems settings menu
for instruction on page 16.
6.7 Conditional Access System
➊
Card Initializing
To Enjoy CONAX scrambled channels, you will need a Smart Card from the service
provider (program distributor). If you are subscribing to services from more than one
service provider, you will need a Smart Card from each one. Since a Smart Card is
connected to a single service provider, a limited range of channels will be available via it.
✽
Note
: Without the Smart Card, you can watch only Free-To-Air programs.
1. Insert the Smart Card into the receiver
2. The message Smart Card Initializing will appear on the
screen. <Figure 6.7.1>
3. You will be able to watch
the channels offered by the service provider.
Figure 6.7.1
➋
The Status of the Smart Card
You can access detailed information about the Smart Card using the keys in the Main
Menu to select
Conax CA
and pressing
OK.
✽
Note
: Further detailed information is not mentioned in this manual since the information
depends on the Smart Card in use.
[2015.06.15]SRT4935Ⅱ Manual_French_NIG_rev1.0.indd 21
2015-06-16 오후 2:21:51
