13
English
➍
Channel Selection
▣
If you know the channel number, you can enter it with the
NUMERIC
buttons and wait
2 seconds until the channel is changed.
▣
You can press
OK
to display the channel list <Figure 6.1.7>
1. You can use the following buttons to navigate between channels:
6. Operation
▣
OTA Menu
1. Select a satellite for OTA service
2. Enter the transpondes’s information (frequency, symbolrate)by 0~9 buttons.
3. Press
RED
button to start Scan.
4. If transponder’s information is correct, a pop-up window will display to update software.
Figure 6.1.7
▪
: Moves one channel up/ down.
▪
: Moves one page up / one page down.
▪
RED:
Shows all channels in the current group.
▪
GREEN:
Shows all channels sorted alphabetically.
▪
YELLOW:
Shows all channels sorted by Transponder.
▪
BLUE:
Shows all channels sorted by CAS system.
2. Press
OK
when the selection bar is positioned on the
desired channel.
➎
Other Functions of the Remote Control
▣
Volume Control
1. While watching a program, press or to control the volume.
2. You can press the
MUTE
button to remove the sound of the program: the mute icon will be
displayed. Press the
MUTE
button again to turn the sound back on.
▣
Channel Information
1. You can press the
INFO
button to display the information banner for a few seconds.
2. If you then press the
INFO
button again, a detailed banner will be displayed.
▣
TV/ RADIO switching
You can press this key to change from a TV channel to a Radio channel or vice versa.
▣
RECALL
Press to return to the previous channel.
[2015.06.15]SRT4935Ⅱ Manual_French_NIG_rev1.0.indd 13
2015-06-16 오후 2:21:48
