10
6. Operation
6.1
Getting Started
After your receiver is powered on, proceed with installation as follows :
➊
Menu Language Setting
1. Turn on your TV and receiver.
2. The wizard menu for language selection will appear.
<Figure 6.1.1>
Select one language and press
OK
on proceed.
Figure 6.1.1
➋
Antenna Setup
1. Press the
MENU
button to display the main menu.
2. Press
OK
on ‘Dish Setting’. The following window will appear. <Figure 6.1.2>
3. If you have a motorized dish, press
OK
on ‘Motorized Setting’. < Figure 6.1.3>
✽
Note:
Enter a 4-Digit password if need arise. The default password is ‘0000’.
4. Select the item that you want to edit, and set its
parameters as desired. <Dish Setting>
▪
LNB Power:
Select among ON/OFF/13V/18V.
▪
LNB Type:
Select among Single/Universal/OCS
▪
LNB Freq:
Set the frequency of the LNB oscillator.
▪
22KHz:
When not AUTO, set the signal path from
LNB or switch by selecting a control signal among
0/22KHz.
▪
DiSEqC 1.0:
Select DiSEqC 1.0 Port
▪
DiSEqC 1.1:
Select DiSEqC 1.1 Port
Figure 6.1.2
[2015.06.15]SRT4935Ⅱ Manual_French_NIG_rev1.0.indd 10
2015-06-16 오후 2:21:46
