11
English
➊
Menu Language Setting
1. Turn on your TV and receiver.
2. The wizard menu for language selection will appear.
<Figure 6.1.1>
Select one language and press
OK
on proceed.
6. Operation
Figure 6.1.3
(When the DiSEqC Motor parameter is set as 1.2)
If you select “diseqc1.2”, “Sat Degree/Antenna Longitude/Antenna Latitude” is not available.
▪
Moter Setup :
Setup motor by press
OK
.
▫
Frequency :
Press button to change TP.
▫
Go to x :
Press
OK
to open a list you can to to X or go to reference.
▫
Save :
Press to move the dish and press
OK
to save position.
▫
Recalculate :
Press
OK
to recalculate.
(When the DiSEqC Motor parameter is set as USALS)
▪
Sat Degree:
Satellite location.
▪
Antenna Longitude:
Your longitude at present.
▪
Antenna Latitude:
Your latitude at present.
▪
Motor Setup:
Press
OK
Set the Antenna Longitud/Antenna Latitude, Usals can move dish automatically.
✽
Note:
You need to know what LNB you are using to correctly set the L.O.
(local oscillator) frequency.
✽
Note:
You need to understand how your receiver is connected to properly set the
22KHz and DiSEqC.
5. Select the item that you want to edit and set its
parameters as desired. <Motorized Setting>
▪
Frequency:
You can select appropriate TP frequency
at which to check for signal.
▪
DiSEqC Motor:
Select DiSEqC protocol among OFF/1.2/
USALS as appropriate for your Motor.
▪
Limit Setting :
press
OK
▫
Save :
Move the dish to west or east by pressing .
When you are moving to the target place, press
OK
to
save point.
▫
Goto Reference :
Move the dish to the 0 position.
[2015.06.15]SRT4935Ⅱ Manual_French_NIG_rev1.0.indd 11
2015-06-16 오후 2:21:47
